Revit 2012 Tutorials Family Putting Voids in Solids

In the previous blog post , we've covered all the bones principles to properly create a door family unit. In this tutorial, we will use this noesis to create a simple swing door. The door volition accept a steel frame and will be adapted mostly for an interior use on drywall. It volition have a simple panel with no glazing.

Information technology will include a simple handle lever hardware on both side of the panel, with a customizable strike distance tiptop. The door swing will be customizable with an bending parameter. Information technology will include a formula to calculate a value for Rough Height and Rough Width dimensions. The materials will be customizable inside a project for the door frame, door panel and all the hardware.

Some elements will exist included direct within the family, but some other elements volition exist inserted every bit nested families.

ane- CREATE NEW FAMILY WITH THE DEFAULT TEMPLATE

Create a new family. Utilize the Metric - Door or Regal - Door default Autodesk template.

This door family unit template is made for a residential wooden door family unit past default. Since nosotros are building a door with a steel frame, you'll need to delete a few elements. Go to the plan view. Delete the trim elements.

two- CREATE ROUGH DIMENSIONS REFERENCE PLANES

Let's create additional reference planes to adapt for the full door opening that includes the frame. Go to the front tiptop view. Create new reference planes like displayed in scarlet in the image below. Don't worry about dimensions for now.

The red reference planes are used for more clarity in the tutorial, but it'southward ok if you apply the standard greenish ones.

3- CREATE FRAME THICKNESS PARAMETER

To fully automate the consummate door opening, you lot need to create a new Frame Thickness parameter. Go to the Family Type menu. Click on the small icon to create a new parameter. Use the settings as in the paradigm below.

4- CREATE ROUGH WIDTH AND HEIGHT FORMULAS

Type in a standard value for the Frame Thickness, like 50mm. Now, type in formulas like in the image below for both the Crude Width and the Rough Pinnacle parameter. These values are calculated by calculation the frame thickness to the door elevation and width. Subtract a number to business relationship for the overlap between the frame and the wall. In this case, we use 19mm.

5- ASSIGN Rough DIMENSIONS TO REF. PLANES

Now, go dorsum to the family elevation. Add a new dimension between the 2 scarlet vertical reference planes and the primal one. Click on the EQ button.

Create new dimensions every bit illustrated below. Assign the "Crude Width" and "Crude Height" labels.

Maybe you should download our new pamphlet about doors. Information technology contains this blog mail service in PDF format and many more useful tips.

half-dozen- LOCK OPENING Cutting TO Crude WIDTH /HEIGHT

In the elevation, select the Opening Cut. Click on Edit Sketch. Apply the Align tool (shortcut: AL) to align each purlieus line to the cherry reference planes. Click on the Lock icon to lock the constraint. The opening cut will at present include part of the frame instead of only the door panel.

7- MODEL DOOR Panel IN Acme

Stay in the tiptop view and select the Extrusion tool. Employ the Pick Line tool and click on the green reference lines assigned to the Peak and Width. Lock all the boundary lines. Then, use the Trim tool (shortcut: TR) to cut the excess line segments. Click on the dark-green bank check to complete.

8- ASSIGN DOOR THICKNESS IN PLAN VIEW

Become back to the plan view. Create a new reference aeroplane below the outside wall confront, as in the epitome beneath. Create a dimension between the reference planes and assign the "Thickness" parameter to it. Make certain to lock the thickness parameter. Use the Marshal tool (shortcut: AL) to friction match the panel to that new reference plane. Click on the lock icon.

9- Deactivate Panel VISIBILITY IN PLAN VIEW

The 3D door console nosotros've just created should be visible in 3D views and elevations, but not in a programme view. Instead, nosotros're going to load a plan swing family later on.

Select the door panel. In the instance parameter, click on Visibility / Graphics Overrides.

Hey mate! Do you like this postal service? Check out our pop Nuts package. It is designed to help you learn Revit in a spirit of fun and simplicity. It has been downloaded by thousands of users. Click on the paradigm to larn more.

ten- CREATE A SWEEP FOR THE DOOR FRAME

Become to the elevation view. Select the Sweep tool. Click on Option Path, so select the 3 edges of the opening cut. Click the dark-green check to complete

xi- Depict THE FRAME PROFILE IN PLAN VIEW

Draw the sweep profile in the floor program view. Draw the boundary lines every bit in the epitome below. Make certain to lock all the dimensions. Create a new vertical reference airplane with the "Frame Thickness" parameter assigned. Keep a 5mm distance from the door panel to the frame middle section. If you want, you tin include the frame thickness (like on the right image). Test the frame by changing the door width and the default wall thickness.

12- CREATE A COARSE FRAME MASKING REGION

When working in view using the Coarse setting, yous might want to see a simple frame instead of the complex sweep we've created. Select the frame sweep and click on Visibility/Graphics Settings in the instance properties. Uncheck visibility for fibroid setting. And so, use the Masking Region tool with Frame/Mullion [cut] lines and create a rectangle that is locked to the reference planes. Brand information technology visible only in coarse views.

13- ASSOCIATE A NESTED Plan SWING FAMILY

Earlier, nosotros deactivated the door console visibility in program view. At present, it'south time to load a nested Plan Swing Family. You lot can apply an Autodesk made family unit, but it would exist smart to create your own plan swing family unit. Be warned: making such a family is not an easy task. Nosotros describe all the steps on the Revit Pure Pamphlet you tin can download at the bottom of this post.

When the family is set up, make certain to associate the Thickness, Width and Swing Angle parameters to the main door family. Align and lock the swing family unit to the reference planes in the chief family.

14- LOAD HARDWARE FAMILIES

Now, we'll insert an Autodesk Handle Lever Family. Go to the Insert tab and click on Load Family. Become to the Hardware subfolder in the doors category. Place the family unit in a programme view. Align and lock to reference planes. Set and lock altitude from the door panel border.

Go to the elevation view. Create a new horizontal reference plane. Create a dimension from the base level. Assign a new parameter chosen Strike Distance. Meet tip 4 if you lot don't remember how to create a new length parameter. Align the middle of the handles to this reference plane and lock.

Get back to plan view and disable the plan view visibility for the handles.

15- ASSIGN SUBCATEGORY TO ELEMENTS

To properly control the visibility and graphics of each door component, you need to properly assign the correct subcategories. Go to the program view. Select the door frame sweep. In the case properties, set it to Frame/Mullion. Repeat the aforementioned steps to identify the door panel in the Console subcategory. Make sure to place whatever door element to the correct subcategory.

16- CREATE Fabric PARAMETERS

You need to create new material parameters for the door frame, panel and all the hardware components.

Click on the door panel. In the case properties, click on the minor rectangle. Create a new parameter called Console Material. Yous'll exist able to assign a textile once inside a projection. Echo the same stride for the frame and create a Frame Material.

Do you want to get this web log postal service in PDF format? With fifty-fifty more than bonus content? Check out our latest pamphlet publication nigh door families. You will even larn how to create a door swing family.

morenofouldlairity.blogspot.com

Source: https://revitpure.com/blog/16-steps-to-create-a-door-family-in-revit

Share this post